KeelEazy tape

KeelEazy is a self-adhesive (peel and stick) strip that provides an extremely durable surface anywhere that abrasion is a concern. Ideally suited for the keel of kayaks and canoes. It is easily applied to composite, PE, ABS and metal surfaces and can be molded over compound curves with the use of a heat gun. We keep in stock 2'' (5 cm) black tape.

Application:

• Clean surface throughly. Use Isopropyl Alcohol (rubbing alcohol) on Polyethylene, Varnish, Fiberglass, or ABS. Acetone may be used on Fiberglass as well.
• Round The Corners. Use scissors to round off the corners at the ends of the strip.
• Separate the blue backing tape from the tan adhesive. This seems to be the most challenging part when installing for the first time. Use a razor blade or razor knife. It is also much easier if you place the KeelEazy in the freezer for 5 minutes prior to separating.
• Press the strip onto the hull. Once one end is firmly attached you can stretch the strip slightly. Then go over the strip with a hair dryer or hot air gun on a low setting to press out any wrinkles.

NB! KeelEazy tape is sold be meter (9 EUR/m)